關於我們

當前所在頁麵:首頁 > >正文

公司(sī)新聞

Pneumatic vibrator introduction

點(diǎn)擊數:3313    發布(bù)日期:2016-12-13

Pneumatic vibrator with compressed air as power source, low consumption, safe and energy saving. The utility model has the advantages of small size, less failure, easy installation and maintenance, and is an ideal device used in a freezing or high temperature environment.

Pneumatic vibrator is widely used in food, medicine, chemical, pesticide, feed, ceramic, glass, cement, fuel and other powder processing industry, fatigue test for parts or components; jitter, compaction hopper; linear and bowl feeder, vibration sieve and filter; and mixing equipment.

Characteristic
Rotary centrifugal pneumatic vibrator made of extruded aluminum shell,. For special applications, such as the pharmaceutical industry, the shell can be made of stainless steel. There is a ball or rotor in the high-speed rotation on the centrifugal force. Suitable for use in dusty or humid working conditions. There is a standard pipe thread at the inlet and outlet to ensure smooth exhaust. With two vertical and two horizontal mounting holes to facilitate installation in any difficult installation position

Classification of pneumatic vibrators
According to the form and working principle of the pneumatic vibrator, the vibrator can be divided into three categories
Rotary centrifugal
Linear reciprocating
Impact hammer

Application of pneumatic vibrator
The size of the pneumatic vibrator is small and its frequency can be controlled by adjusting the air flow:
Help from the chute and hopper conveyor materials. To prevent the bottles or similar products in the conveyor equipment jammed or blocked.
Compaction of materials in containers or moulds. Separate the materials of different size in the separator, screen or filter.

Installation and operation of pneumatic vibrator
Before installing the vibrator, make sure that the installation position is carefully selected to ensure that the best operating results must be clean and flat. Because of the torsional vibration of the vibrator, the vibrator is not working properly. The installation of the vibrator should be as far as possible, so that the rotation direction of the ball and roller can support the flow of the material. The inlet direction can be easily determined by the correct installation position.

It is recommended to use 8.8 or more inner or outer six corner screws of the class six. Use a toothed lock washer or spring lock washer. Make sure the vibrator is firmly installed. It is recommended to tighten the screws after a few minutes of work. Do not work with the vibrator on the hopper and the feed line when the hopper or feed path is empty, as this may cause damage to the structure

Chinese: pneumatic vibrator, brand name: KLSX
Category: rotating centrifugal
The patent company: Fenghua Kechuan Power Technology Co. Ltd.




168官方开奖App-168开奖网官方网站-168开奖网下载