關(guān)於我們

當前所在頁麵:首頁 > >正文

公司新聞

Cold air gun

點擊數:3872    發布日期:2016-12-13

便攜的冷氣源_吹出低於冰(bīng)點的冷空氣


Air code gun also known as cold air pipe, vortex cold air gun, local cooler, dry cooler, etc.
KLSX cold air gun is the most reliable and cost-effective product,its products are widely used around the world

Brief introduction
The stainless steel cold air gun is a cooling equipment which is suitable for the factory application by the eddy current cooling principle. Only the compressed air as the power source, the ambient temperature can be reduced to 75 degrees F compressed air cooling (-38 C) cooling air flow.

Very portable air conditioner
1 Cold air gun is a portable air conditioner, which is widely used in the process of mechanical drying or point cooling. The utility model can provide cooling application in the industrial environment with bad environment.
2 Cold air gun with compressed air, you can reduce the compressed air temperature (-38 C) to produce low temperature air flow.
3 Cold air guns clean and easy to install, the permanent magnet base and flexible bending tube can turn into any position need cooling flow! 
4 Cold air gun is made of very strong stainless steel. It is designed and processed by computer. In the use of coolant, water or other corrosive substances in the environment, will not be corroded rust. Just align the cooling object, you can work steadily, instant on / off, maintenance free, no moving parts, service life of up to ten years.

Application of cold air gun
1, no coolant, Zero chemical loss or residue.
2, cooling of solder joints, hot metal, hot adhesive
3. electronic components, circuit boards and temperature regulators for cooling heat detection.
4.cooling of hot fitting parts.
5, cooling hot mold, ultrasonic device.
6, cooling sewing needle in order to prevent broken line, to avoid heat, resulting in synthetic wire fracture.
7 to improve the service life of the tool, improve the rate of finished product ,improve the surface finish , reduce the difference
8 enhance the workpiece feed speed and improve the quality of the workpiece.
9 no coolant consumption, to avoid the pollution caused by coolant, stimulate the skin, dirty walls.
10 cold air drying, used in metal, composite materials, plastics, rubber and wood processing industry.


Adjustable stainless steel cold air gun



Model

Product description

Material

Air pressure

Cooling air flow

Noise

KL60055

Curved tube + magnetic base

Stainless steel

 0.8mpa

( -38°C)

60DBA

Typical application cases

Plastics processing - Mechanical - metal processing - band saw cutting - grinding of textile - sewing / embroidery - food processing - food products cooling-Cooling die - mold cooling of optical fiber coloring system

後一(yī)篇:Pneumatic delay valve 前一(yī)篇:Vortex tube



168官方开奖App-168开奖网官方网站-168开奖网下载