Product name : Pneumatic vibrator

Brand name: KLSX
Category: rotary centrifugal, reciprocating piston, piston impact
Patent company: Fenghua Kechuan Power Technology Co., Ltd.
Web: www.sdgwzzf.com

Pneumatic vibrator brief introduction:

Even today, in some parts of the world, the use of manual hammer impact is still a few centuries ago, as the flow of auxiliary materials., therefore, it is urgent to use non human driving vibration components, Pneumatic vibrator was applied at the beginning of this century, today a lot of work is done by vibrator
Its main application is to empty the hopper, material screening, concrete compaction and sand, soil and any other powder or small particles and screws, etc. In the electronics industry, vibration is also used to detect the contact of the printed circuit board..

Classification of pneumatic vibrators

According to the form of energy consumption and working principle of the vibrator, the vibrator can be divided into the following types:

Electric vibrator defect
Due to the special structure of the electric vibrator itself, its service life is much shorter than the ordinary motor, such as: lack of phase, overload, over-current, high temperature, dust. Short circuit, leakage, etc.,
will cause the electric vibrator burns, causes the loss, affects the production and raises the security accident. In particular, the dust environment will have the risk of explosion.

Characteristics of pneumatic vibrator
Pneumatic vibrator made of extruded aluminum shell. For special applications, such as the pharmaceutical industry, the shell can also be made of stainless steel. The vibration frequency and vibration intensity can be controlled by adjusting the air flow. Its main advantages and usages:
1.The utility model has the advantages that the compressed air is used as the power source, the air consumption is small, the utility model has the advantages of safety and energy saving, and the utility model is an ideal device which is used in the environment of freezing or high temperature, and is suitable for the environment of wet, dry ash or explosion.
2 small size, less fault, easy installation and maintenance.
3 stop or start quickly, suitable for manual or automatic system.
4 vibration force, vibration frequency and amplitude can be adjusted freely in motion.
5 a wide range of applications, the fatigue test for parts or components; jitter, compaction hopper; linear and bowl feeder, sieve and filter; vibration and mixing equipment.
Such as filling machine, coating machine, leakage meter, feeder, conveyor belt, dehydration, particle suspension etc.. Widely used in food, medicine, chemicals, pesticides, feed, ceramics, glass, cement, fuel and other powder processing industry; and a variety of models to fit

Installation and operation of pneumatic vibrator
Installation of pneumatic vibrator should be determined before the installation position is carefully selected to ensure that the best results of the installation surface must be clean, flat. Torsion vibration causes the vibrator to work abnormally in non smooth surface installation. The installation of pneumatic vibrator should be as far as possible to make the ball, roller, piston movement direction of the flow of material support, the inlet direction can be easily determined by the correct installation position.

It is recommended to use class 8.8 or more inner six angle, or outside of the six angle screws, use a toothed lock washer or spring lock washer, It is recommended to use oil mist type lubrication, lubrication can prolong the life of the vibrator several times. The vibrator installed on the hopper and the feed path should not be operated when the hopper or the feed path is empty, as this may cause damage to the structure.